After installing Russell Speed Bleed 639570 one way valves. Bleeding the brake lines was really simple. Put on the socket wrench, attach the hose to the bleeder, crack the valve open, pump the brake pedal 10 times, top up the brake fluid, collect the old fluid, close everything back up again.

Trying to get a set of unbroken mirrors is difficult

All the mirror brackets seem to be broken in the same place.

Attempting to fix with superglue and putty.

Put back the 1 Yen where I found it when I removed everything

New carpet underfill.

Original carpet installed.

Parts rinsing after being soda blasted.

Clutch fan installed

New parts, installed.

Yet to find a Soarer patch, got a Toyota one though.

Removing the old crankshaft bolt required the SST numbers: 0933000021 and 0921370011 and a breaker bar to get the old bolt moving.

Bolt is removed. Everything looks clean and ready for the fresh bolt part number: 9010518003

The new Bolt needs to be torqued to 159ftlb.

Finished with a new crankshaft bolt installed.

Installed Cusco 180 510 A Strut Tower Bar.

All the wiring under the dash done.

The repaired crash pad.

Everything cleaned and installed on the crashpad

Everything installed.

For future reference. All th nuts and bolts that remain to be installed to hold it all in place.

Door handles cleaned with autosol and never-dull and then re-installed.