Removing condenser bracketry

Condenser bracketry

Prepping for spray painting.

New and old condensers.

Moving across the service valves to the new compressor.

New compressor installed.

If you can't buy it, you have to rebuild it.

Heater core rebuilt with new seals..

Cleaning out the AC unit. So many leaves, and so much dust.

Rebuilt,

Cleaned and ready.

Installed.

All the back seat parts disassembled for cleaning

The back seat restored with stacks of Lanolin grease and Connolly Hide Care.

Begin installing everything

Back in place.

Installed!

Acquired the Muscle Car Research Kelsey-Hayes Multi-Make Proportioning Valve Seal Kit.

The Piston Seal and U-Cup in this kit match the ones found inside the proportioning valve PN 4719014020.

The Piston Seal ID 0.3 in OD 0.5 in

The U-Cup Seak ID 0.25 in OD 0.5 in

Here is a comparison of the old and new seals. Old original seals are on the left.

The prop valve disassembled.

The copper crush washers are ID 11/16in OD 7/8in height 1mm.

These seals should also suit the Proportioning valves found in the following car models.

Rebuild:

Main brake lines installed

Installed the ABS

All the fiddly parts at the bottom.