Old Hose removed.
New Fuel Hose
Need to give this circut new capacitors to get the speakers to work again.
First start, with low RPM idle
Longer start with 2000RPM idle.
Harness:
- 0.3G - Illumintion
- 0.5GW - Power
- 0.5LY - Accessories
- 0.5WB - Ground
- 0.5RW - Antenna
- 0.5LR - Amplifier
- 0.2B - Rear Left +
- 0.2Y - Rear Left -
- 0.2R - Rear Right +
- 0.2P - Rear Right -
- 0.2P - Front Left +
- 0.2V - Front Left -
- 0.2Lg - Front Right +
- 0.2L - Front Right -
All that remains to do is start it.
Cluster disassembled for cleaning.
Reassembling all the different layers.
Completed!
Cluster installed in the dash.
Fitting all the plugs into the fascia before installing it.
Lining everything up.
Finished!
EMV Box arrives!
EMV box contents.
EMV in dash for testing!
Video from the phone is not the greatest, but it works!!
List of remaining things required before the car can be registered:
Necessary
- Reinstall cat converter. ☑
- Rebuild the dash. ☑
- Check brake lines and bleed. ☐
- Fix petrol tank lid. ☑
- Fix and install grille. ☐
- Attach front bumper. ☐
- Install front bumber indicators. ☐
- Get Front and Rear windscreens supplied and installed - need to find a reliable glazier who can supply and install NAGS code TT1506 PGI code TT9000. Size 1510 x 723. ☐
- Fix relay or fuse for parking headlights. ☑
- Install bonnet. ☐
- Retorque head bolts to 74 Ft/lb. ☑
- Install washer bottles. ☐
- Acquire and install boot rubber. ☑
- Complete filling the car with fluids. ☑
- Finish rebuilding interior trim. ☐
- Source new tyres. ☑
- Start car. ☐
Optional
- Acquire and fit a new stereo. ☐
- Rebuild passenger side door. ☑
- Install mud guards and under body plastic protection. ☐
- Fog lights. ☐
Seems like the csync emitted by the EMV computer is either too noisey or not amplified enough for the upscaler board to get a lock on the signal.
To rectify this I have ordered:
- LM1881 eg. http://www.mmmonkey.co.uk/composite-sync-stripper-lm1881/
- EL4853 eg. http://shmups.system11.org/viewtopic.php?f=6&t=43992
- JROK Sync Cleaner
Also here is a test fit of the LCD I am using on the CRT mounting bracket.
