Original Stereo Wiring Diagram
Molex Wiring from Car Loom to Stereo Loom
More Molex connectors
FM band expander, to get Australian Fm frequencies
Wiring the auxillary connection into the ashtray.
Stereo with lights.
Stereo
Installed Cusco 180 510 A Strut Tower Bar.
After installing Russell Speed Bleed 639570 one way valves. Bleeding the brake lines was really simple. Put on the socket wrench, attach the hose to the bleeder, crack the valve open, pump the brake pedal 10 times, top up the brake fluid, collect the old fluid, close everything back up again.
Before
After
Installed!
Acquired the Muscle Car Research Kelsey-Hayes Multi-Make Proportioning Valve Seal Kit.
The Piston Seal and U-Cup in this kit match the ones found inside the proportioning valve PN 4719014020.
The Piston Seal ID 0.3 in OD 0.5 in
The U-Cup Seak ID 0.25 in OD 0.5 in
Here is a comparison of the old and new seals. Old original seals are on the left.
The prop valve disassembled.
The copper crush washers are ID 11/16in OD 7/8in height 1mm.
These seals should also suit the Proportioning valves found in the following car models.
| Market | Date range | Model | Frames/Options |
|---|---|---|---|
| N. America | 08/1979-06/1983 | TOYOTA COROLLA | AE71E,TE72E |
| Europe, General | 08/1981-08/1983 | TOYOTA CARINA | TA6*,CA60 |
| Europe, General | 08/1977-06/1981 | TOYOTA CELICA | TA40B,RA40B |
| Europe, General | 08/1981-11/1985 | TOYOTA CELICA | AA63,TA60,SA63,RA6*,MA61 |
| N. America | 08/1981-11/1985 | TOYOTA CELICA | RA6*,MA61 |
| Europe, General | 01/1982-06/1999 | TOYOTA CORONA FR | CT14*,RT14*,ST141,TT14*,YT140 |
| Europe, General | 08/1988-07/1996 | TOYOTA CRESSIDA | GX81,LX80,MX8*,RX8* |
| Japan | 02/1981-11/1985 | TOYOTA SOARER | GZ10,MZ1* |
| Japan | 09/1979-06/1983 | TOYOTA CROWN | GS11*,LS11*,MS11*,RS110 |
| Europe, General | 09/1979-06/1983 | TOYOTA CROWN | RS110,MS11*,LS110 |
| Japan | 10/1982-08/1987 | TOYOTA CENTURY | VG40 |
| Japan | 08/1980-09/1984 | TOYOTA LAND CRUISER | BJ4* |
| Europe, General | 08/1980-03/1986 | TOYOTA LAND CRUISER | BJ4*,HJ47,FJ4* |
| N. America | 08/1980-09/1984 | TOYOTA LAND CRUISER | BJ42,FJ40 |
| Japan | 08/1980-07/1987 | TOYOTA LAND CRUISER | BJ6*,FJ6*,HJ6* |
| Europe, General | 08/1980-07/1987 | TOYOTA LAND CRUISER | BJ60,HJ6*,FJ6* |
| N. America | 08/1980-07/1987 | TOYOTA LAND CRUISER | BJ60,HJ60,FJ6* |
Rebuild:
- Make and install heat shield for the TRUST header.
- Install the Raptor Racing intake.
- Install the battery isolation switch.
- Figure out the fuel level sender issues (is it back to working now?).
- Fix the bonnet, so it sits flush and also so that the windscreen washers fire properly.
- Fix the fitment of the drivers side fender so it doesn't rub when the driver's door is opened and closed.
- Figure out why the door control solenoid is acting up (is it that the switch in the drivers side door is not working, or is it just the wrong unit?)
- Install the rear speakers.
- Install new P/S rack and pump.
- Redo all the suspension (is it possible to recondition the TEMS inserts?).
- Redo all brake components (rotors and calipers).
- Figure out why the EMV only works intermittently.
- Get the air conditioner regassed.
- Rebuild the drivers side door card.
- Figure out and install the fog lights (how do they turn on?).
- Install rear windscreen and headlight washers.
- Get the rear FRP bump stops painted.
- New fluids.
- Install any missing rubber seals and electrical cable conduits.